DTC P0600: Can Communication Bus: DTC Detecting Condition

DTC DETECTING CONDITION

Item		Detecting Condition	Possible Cause
Case1	DTC Strategy	CAN message transfer incorrect	Open or short in CAN line Contact resistance in connectors Faulty PCM
	Enable Condition s	Battery voltage >10V Engine speed > 32 rpm + 0.5 sec. Time delay
	Threshold Value	CAN message is incorrect
	Diagnostic Time	20 wrong messages
Case2	DTC Strategy	No message from control module
	Enable Condition s	Battery voltage >10V Engine speed > 32 rpm + 0.5 sec. Time delay
	Threshold Value	Time exceeded without message = 1 sec.
	Diagnostic Time	1 sec.