Cooling System Inspection
- Check cooling system coolant level and fill if low.
- Check for a proper cooling system operation. Especially check that cooling and condenser fan working normally.
- Remove the thermostat and check the following items:
- Stuck or damaged
- Verify the temperature at which the valve begins to open.
- Valve opening temperature : 80~84°C (176~183.2°F)
- Valve opening temperature : 95°C (203°F)
- is a problem found?
YES
- Repair as necessary and go to VERIFICATION OF VEHICLE REPAIR procedure.
NO
- Go to TERMINAL AND CONNECTOR INSPECTION procedure.