Fuel Line: Installation

Install a new grommet and O-ring to the injector.
Apply a coating of solvent, spindle oil or gasoline to the injector O-ring.

Fig 1: Installing New Grommet And O-Ring To Injector
Courtesy of HYUNDAI MOTOR CO.
While turning the injector to the left and right, install it on to the delivery pipe.
Be sure the injector turns smoothly.
NOTE: If injector does not turn smoothly, the O-ring may be jammed. Remove the injector and reinsert it into the delivery pipe and recheck.

Fig 2: Removing Injector
Courtesy of HYUNDAI MOTOR CO.