Specification (Abs & TCS)
BRAKE SPECIFICATIONS (ABS & TCS)
| PART | ITEM | STANDARD VALVE | REMARK | |
|---|---|---|---|---|
| HECU (Hydraulic and Electronic Control Unit) | System | 4 channel 4 sensor (MGH-25) | ||
| Type | Motor, valve relay integrated type |
|
||
| Operating voltage | 10V~16V(DC) | |||
| Operating temperature | -40~110°C(-40~230°F) | |||
| Motor power | 180W | |||
| Pump orifice | diameter 0.5mm(0.0197 in.) | |||
| Accumulator capacity | LPA | MCS: 2.5cc/MCP2.5cc | LPA: Low pressure accumulator | |
| HPA | 0.13cc | HPA. High pressure accumulator | ||
| Valve | Inlet valve (NO) | Front: diameter 0.71mm (0.0280in.) Rear: diameter 0.315mm (0.0124 in.) |
NO valve: 4 | |
| Outlet valve (NC) | Front: diameter 0.56mm (0.0220 in.) Rear: diameter 0.355mm (0.0140 in.) |
NC valve: 4 | ||
| Traction Control valve relief pressure | 120bar | With TCS | ||
| Warning lamp | Operating voltage | 12V |
|
|
| Current consumption | 80mA | |||
| wheel speed sensor (CBS) | Internal resistance | 1385+/-110ohm; | 23+/-5°C | |
| Output range | 15~2000HZ | |||
| Min.Voltage peak | 130mVp.p (15HZ) 200mVp.p (1000HZ) |
Max.air gap | ||
| Air gap | 0.2~1.3mm (0.0079~0.0512 in.) | |||
| Active wheel speed sensor (ABS) | Supply voltage | DC 12V | ||
| Operating temperature | -40~120°C | |||
| Output current low | 5.9~8.4mA | |||
| Output current high | 11.8~16.8mA | |||
| Frequency range | 1~2000HZ | |||
| Air gap | 0.5~1.5mm (0.019~0.0591 in) | |||