DTC P0707 Transaxle Range Switch - No Input: DTC Detecting Condition

DTC CHART

Item	Detecting Condition & Fail Safe	Possible cause
DTC Strategy	Check for No signal	Open or short in circuit Faulty TRANSAXLE RANGE SWITCH Faulty PCM
Enable Conditions	Engine speed ≥ 500rpm OUTPUT SPEED(PG-B) ≥ 0rpm
Threshold value	No signal detected
Diagnostic Time	More than 30sec
Fail Safe	Recognition as previous signal When P-D or R-D or D-R SHIFT is detected, it is regarded as N-D or N-R though "N" signal is not detected. When sports mode S/W is ON without P, R, N, D-RANGE signals, it is regarded sports mode.(DTC is not set)