FixVault
Home › Hyundai › 2006 › Elantra Limited › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle System (F4A42) › Automatic Transaxle Control System › Output Speed Sensor › Removal

Output Speed Sensor: Removal

  1. Removal of the battery and air cleaner, (see TRANSAXLE RANGE (TR) SWITCH  ).
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor
    G04924363Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
About FixVault