FixVault
Home › Hyundai › 2006 › Elantra Limited › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle System (F4A42) › Automatic Transaxle Control System › Vehicle Speed Sensor › Removal

Vehicle Speed Sensor: Removal

  1. Lift up the vehicle.
  2. Remove the vehicle speed sensor (A).
    Fig 1: Identifying Vehicle Speed Sensor
    G04924381Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the vehicle speed sensor connector (B).
    2. Remove the bolt (10mm).
    3. Inspect the vehicle speed sensor bore.
  3. Inspect the O-ring for nicks or cut. Install a new O-ring as necessary.
About FixVault