DTC P0707 Transaxle Range Switch - Low Input: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible cause
DTC Strategy	Check for no signal	Open or short in circuit Faulty Shift cable adjustment Faulty Inhibitor switch and Manual control lever position adjustment Faulty TRANSAXLE RANGE SWITCH Faulty TCM (PCM)
Enable Conditions	Engine Speed ≥ 1200rpm Battery Voltage ≤ 10V
Threshold value	No signal detected
Diagnostic Time	More than 30 sees
Fail Safe	Recognition as previous signal. When P-D or R-D or D-R SHIFT is detected, it is regarded as N-D or N-R though "N" signal is not detected