FixVault
Home › Hyundai › 2007 › Elantra GLS, Automatic › Repair and Diagnosis › Transmission › Transmission Control Systems › Automatic Transaxle Control System (A4CF2) › Automatic Transaxle Control System › Input Speed Sensor › Removal

Input Speed Sensor: Removal

  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly (refer to REMOVAL )
  5. Remove the input shaft speed sensor connector (A).
    Fig 1: Identifying Input Shaft Speed Sensor Connector
    G05364270
  6. Remove the input shaft speed sensor (A).
Fig 2: Identifying Input Shaft Speed Sensor
G05364271
About FixVault