FixVault

Ground Circuit Inspection

  1. Check open in ground circuit
    1. Ignition "ON" & engine "OFF".
    2. Measure the resistance between wind shield defogger (E04-1) and chassis ground.

      Specification : 0 Ω

      Fig 1: Measuring Resistance Between Wind Shield Defogger (E04-1) And Chassis Ground
      G05325023Courtesy of HYUNDAI MOTOR CO.
    3. Is the measured resistance within the specification?

      YES 

      Go to "COMPONENT INSPECTION ".

      NO 

      Repair open in ground circuit and go to "VERIFICATION OF VEHICLE REPAIR ".