FixVault
Home › Hyundai › 2007 › Entourage Limited › Repair and Diagnosis (Single Page) › Body & Frame › Windows › Power Windows › Power Windows › Power Window Switch › Replacement › Driver/Assist Door Module (DDM/ADM)

Driver/Assist Door Module (DDM/ADM)

  1. Remove (-) negative battery terminal.
  2. Remove the front door trim panel. (Refer to FRONT DOOR )
  3. Disconnect the door module mounting screws (5EA) after disconnecting the module connectors (3EA) from the motor.
    Fig 1: Identifying Driver/Assist Door Module
    G05325224Courtesy of HYUNDAI MOTOR CO.
  4. Remove the door module (DDM/ADM) (A) from the front door trim panel.
    Fig 2: Identifying Door Module (DDM/ADM)
    G05325225Courtesy of HYUNDAI MOTOR CO.
  5. Installation is the reverse of removal.
About FixVault