FixVault
Home › Hyundai › 2007 › Entourage SE › Repair and Diagnosis › Accessories & Equipment › Memory Modules › IMS (Integrated Memory System) › IMS Control Switch › Replacement

IMS Control Switch: Replacement

  1. Remove the negative (-) battery terminal.
  2. Remove the front door trim panel in the car. (Refer to FRONT DOOR ).
  3. Remove the switch (A) mounting screws (3EA) after disconnecting the 16pin switch connector.
    Fig 1: Identifying Mounting Screws And 16Pin Switch Connector
    G05325167Courtesy of HYUNDAI MOTOR CO.
  4. Remove the connector from the front door trim panel.
  5. Installation is the reverse of removal.
About FixVault