FixVault
Home › Hyundai › 2007 › Santa Fe GLS, AWD, Automatic › Repair and Diagnosis (Single Page) › Accessories & Equipment › Steering Column Switches › Multi Function Switch › Multi Function Switch › Replacement

Multi Function Switch: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering column upper and lower shrouds (A) after removing 3 screws.
    Fig 1: Identifying Steering Column Upper And Lower Shrouds
    G05353241Courtesy of HYUNDAI MOTOR CO.
  3. Remove the light switch (A) by pushing the lock pin (B) after disconnecting the connector (C).
    Fig 2: Identifying Light Switch, Connector And Lock Pin
    G05353242Courtesy of HYUNDAI MOTOR CO.
  4. Remove the wiper switch (A) by pushing the lock pin (B) after disconnecting the connector (C).
    Fig 3: Identifying Wiper Switch, Connector And Lock Pin
    G05353243Courtesy of HYUNDAI MOTOR CO.
  5. Installation is the reverse of removal.
About FixVault