FixVault
Home › Hyundai › 2007 › Santa Fe GLS, FWD, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel System (G6EA-GSL 2.7) › Gasoline Engine Control System › Injector › Inspection › Component Inspection

Component Inspection

  1. Turn ignition switch OFF.
  2. Disconnect injector connector.
  3. Measure resistance between injector terminals 1 and 2.
    Fig 1: Measuring Resistance Between Injector Terminals 1 And 2
    G05348902Courtesy of HYUNDAI MOTOR CO.
  4. Check that the resistance is within the specification.

    Specification: Refer to SPECIFICATION .

About FixVault