FixVault
Home › Hyundai › 2007 › Santa Fe Limited, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel System (G6DA-GSL 3.3) › Fuel Delivery System › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Turn ignition switch off and disconnect the battery (-) cable from the battery.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Locating Accelerator Position Sensor Connector
    G05349403Courtesy of HYUNDAI MOTOR CO.
  3. Unfasten the mounting nuts (B) and remove the accelerator pedal from the vehicle.
About FixVault