Transaxle Oil Temperature Sensor: Installation

Install the oil temperature sensor (A) and connect the sensor connector.
CAUTION: When connecting the oil temperature connector, check the connector for rust, dirt, or oil, then reconnect it.

Fig 1: Identifying Sensor And Valve Body
Courtesy of HYUNDAI MOTOR CO.
Continue to apply liquid gasket at application points at the oil pan with ø0.098in (2.5mm) thickness.
Liquid gasket Part name : Threebond 1281B

Fig 2: Identifying Oil Pan Gasket Area
Courtesy of HYUNDAI MOTOR CO.
Tighten the mounting bolt with the specified torque after installing the oil pan.
TORQUE:

10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)
Install the drain plug.
TORQUE :

35~45Nm (3.5~4.5kgf.m, 25~32lb-ft)
Installation is the reverse of the removal.