FixVault
Home › Hyundai › 2007 › Sonata GLS, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle System (F4A42) › Automatic Transaxle System › Service Adjustment Procedure › Output Shaft Speed Sensor › Replacement

Output Shaft Speed Sensor: Replacement

  1. Remove the battery and air cleaner
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor And Connector
    G04891883Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
  3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  4. Installation is the reverse of removal.
About FixVault