DTC P0708 Transaxle Range Switch-High Input: DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition & Fail Safe	Possible cause
DTC Strategy	Check for multiple signals	Open or short in TRANSAXLE RANGE SWITCH Faulty TRANSAXLE RANGE SWITCH Faulty TCM (PCM)
Enable Conditions	Always
Threshold value	Multiple signal
Diagnostic Time	More than 30sec
Fail Safe	Recognition as previous signal When signal is input "D" and "N" at the same time, TCM (PCM) regards it as "N" RANGE. After TCM (PCM) Reset, if the TCM (PCM) detects multiple signal or no signal, then it holds the 3rd gear position.