Front Lower Arm: Installation
Installation is in the reverse order of removal.
NOTE:
Tighten the components below to the specified torque as follows.
TORQUE SPECIFICATION TABLE
| Items | Torque Nm (kgf.cm, lbf.ft) |
|---|---|
| Wheel nut | 90~110 (900~1100, 67~82) |
| Driveshaft nut | 2.0 L: 200~260 (2000~2600, 148~192) 2.7 L: 200~280 (2000~2600, 148~192) |
| Strut lower mounting | 140~160 (1400~1600, 104~118) |
| Lower arm ball joint nut | 60~72 (600~720, 43~52) |
| Lower arm bushing(A) | 130~150 (1300~1500, 96~111) |
| Lower arm bushing(G) | 130~150 (1300~1500, 96~111) |
| Stabilizer link nut | 35~45 (350~450, 26~33) |