Check Open In Harness
- IG "OFF"
- Disconnect ETC Motor & TPS connector and PCM connector.
- Measure the resistance between ETC motor (+) terminal of ETC Motor & TPS harness connector and ETC motor (+) terminal of PCM harness connector.
- Measure the resistance between ETC motor (-) terminal of ETC Motor & TPS harness connector and ETC motor (-) terminal of PCM harness connector.
Specification : Approx. below 1Ω
- Is the measured resistance within specification ?
YES:
- Go to "COMPONENT INSPECTION " procedure.
NO:
- Repair open in motor harness and go to "VERIFICATION OF VEHICLE REPAIR " procedure.