Power Supply Circuit Inspection

Check for open or short in power harness
1. Ignition "OFF".
2. Connect IMS
3. Measure voltage value between terminal "D09-3-1" of IMS and chassis ground.
  Specification : 9~16V
  
  Fig 1: Measuring Voltage Value Between Terminal "D09-3-1" Of IMS And Chassis Ground
  Courtesy of HYUNDAI MOTOR CO.
4. Is the measured voltage within specifications?
  YES
  
  Go to "COMPONENT INSPECTION " procedure.
  
  NO
  
  Check for open or short in power harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.