FixVault
Home › Hyundai › 2008 › Entourage GLS › Repair and Diagnosis › External Pages › Different car › Section 4 (Starting System) › Starting System › Starter › Removal

Starting System: Starter: Removal

WARNING: This page is about a different car, the 2007 Hyundai Entourage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable.
  2. Disconnect the starter cable (A) from the B terminal (B) on the solenoid (C), then disconnect the connector (D) from the S terminal (E).
    Fig 1: Identifying Starter Cable, Solenoid And Connector
    G04801444Courtesy of HYUNDAI MOTOR CO.
  3. Remove the 2 bolts holding the starter, then remove the starter.
  4. Installation is the reverse of removal.
  5. Connect the battery negative cable to the battery.
About FixVault