FixVault
Home › Hyundai › 2008 › Tucson GLS, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Automatic Transaxle System) › Automatic Transaxle System › Service Adjustment Procedure › Output Shaft Speed Sensor › Replacement

Output Shaft Speed Sensor: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery and air cleaner (see REPLACEMENT ).
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor
    G04811244Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
  3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  4. Installation is the reverse of removal.
About FixVault