Ignition Coil: Replacement

Remove the engine cover.
Remove the ignition coil with bolt.
Tightening torque: 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

Fig 1: Identifying Ignition Coil With Bolt
Courtesy of HYUNDAI MOTOR CO.

NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Fig 2: Pulling Lock Pin & Push Clip
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.