Monitor SCANTOOL Data

Connect scantool to Data Link Connector (DLC).
IGN "ON" & Engine "OFF"
Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter on the Scantool.
Specification : 'LEARNT'

Fig 1: Scan Tool Display - Key Status (Learnt)
Courtesy of HYUNDAI MOTOR CO.
Is the "SMARTRA STATUS" Parameter within specifications ?
YES
- Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "Inspection & Repair" procedure.