Cluster Replacement

WARNING: This page is about a different car, the 2007 Hyundai Azera. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cluster fascia panel (See REPLACEMENT ).
Loosen the screws.
Disconnect the cluster connector, then remove the cluster (A).

Fig 1: Identifying Cluster
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.
  
  Fig 2: Connecting Connector
  Courtesy of HYUNDAI MOTOR CO.