Windshield Wiper/Washer Switch: Replacement

WARNING: This page is about a different car, the 2007 Hyundai Azera. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the steering column upper and lower shrouds (A) after removing 3 screws.

Fig 1: Identifying Steering Column Upper And Lower Shrouds (A-Type)
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Identifying Steering Column Upper And Lower Shrouds (B-Type)
Courtesy of HYUNDAI MOTOR CO.
Remove the multi function switch after loosening 2 screws and disconnecting connector. (In case of multi function switch assembly replacement)

Fig 3: Identifying Multi Function Switch Screws
Courtesy of HYUNDAI MOTOR CO.
Remove the lighting switch (A) after loosening 2 screws.

Fig 4: Locating Light Switch
Courtesy of HYUNDAI MOTOR CO.
Remove the wiper switch (A) after disconnecting the connector and loosening 2 screws.

Fig 5: Locating Wiper Switch
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.