FixVault
Home › Hyundai › 2009 › Elantra SE, Automatic › Repair and Diagnosis › Electrical › Gauges › Trip Computer › Trip Computer › Removal

Trip Computer: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the cluster fascia panel (A) after loosening 2 screws.
    Fig 1: Identifying Cluster Fascia Panel And Screws
    G05365675Courtesy of HYUNDAI MOTOR CO.
  3. Remove the trip computer switch (A) from the cluster fascia panel after disconnecting the trip computer connector.
Fig 2: Identifying Trip Computer Switch
G05365676Courtesy of HYUNDAI MOTOR CO.
About FixVault