FixVault
Home › Hyundai › 2009 › Genesis 3.8 › Repair and Diagnosis › Brakes › Traction Control › ESC (Electronic Stability Control) System › Problem Symptoms Table › ABS Does Not Operate › Inspection Procedures › DTC Inspection

DTC Inspection

  1. Connect the Hi-Scan (pro) with the data link connector and turn the ignition switch ON.
  2. Verify that the normal code is output.
  3. Is the normal code output?

    YES 

    • Check the power source circuit.

    NO 

    • Erase the DTC and recheck using scan tool.
About FixVault