Dis Navigation System Software Update (Service Campaign T63) (SC T63)

Publication date: 2008-11-01
Reference number: SC T63
Supersedes refnos: 08-01-019

DIS NAVIGATION SYSTEM SOFTWARE UPDATE (SERVICE CAMPAIGN T63)

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 08-01-019, Date of Issue: November, 2008

HYUNDAI:	2009 GENESIS
GROUP:	CAMPAIGN

REVISION HISTORY

IMPORTANT: DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED VEHICLES PRIOR TO CUSTOMER RETAIL DELIVERY AND WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP FOR ANY MAINTENANCE OR REPAIR.

IMPORTANT: WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT, ACCESS HYUNDAI MOTOR AMERICA'S "WARRANTY VEHICLE INFORMATION" SCREEN VIA DCS ON-LINE/WEB DCS TO IDENTIFY OPEN CAMPAIGNS.

DESCRIPTION

This bulletin provides the S/W (software) installation procedure to update the 2009 Genesis DIS AA/Navigation System to the latest production level software. The latest levels are as follows:

HEAD UNIT (HU) S/W Level 16.170

UNIVERSAL TUNER AMPLIFIER (UTA) S/W Level 6.8b

HARD DISC DRIVE MAP DATA (HDD) S/W Level 3.0.01

Note that some vehicles will only require the Head Unit and UTA updates, while others will require the complete Head Unit, UTA, and Hard Disc Drive updates.

APPLICABLE VEHICLES

MODEL 2009 Genesis w/DIS Navigation System

VEHICLE PRODUCTION RANGE JOB 1 - OCTOBER 1, 2008

VIN RANGE FOR HU, UTA, AND HDD KMHGC46E69U020268 ~ KMHGC46E09U030486

VIN RANGE HU AND UTA ONLY KMHGC46EX9U029572 ~ KMHGC46EX9U035744

PARTS REQUIRED

PARTS REQUIRED DESCRIPTION

Part Name	Figure	Remarks
AV HEAD UNIT UPDATE CD 96560-3M000B2 Disc B2		SW Level 16.170 Approximate Install Time = 10 minutes
UTA UPDATE CD 96560-3M000B3 Disc B3		S/W Level UTA 6.8b Approximate Install Time = 10 minutes
HDD DVD (MAP DB) 96560-3M000B4 Disc B4		S/W Level HDD 3.0.01 Approximate Install Time = 45 minutes

Cautionionary Notes

Ensure that you have the proper discs prior to beginning the update procedure.
Ensure that the SAW discs (CD and DVD) are free from scratches. Take care while using the SAW discs to avoid scratches.
Ignition must be in the ON position. Never switch the ignition off during the update process.
The vehicle's battery voltage must be stable during the SAW update. Either connect a battery charger to the vehicle or start and run the engine during the update (approximately 1 hour).
The SAW installation order is disc B2, B3, and B4. This exact order must be followed to avoid errors.
Never insert more than one disc into the mechanism at any time. Once a disc is completed, remove it before preceding to the next.

Potential Update Errors

The SAW update can be interrupted or fail under the following conditions:

The SAW discs have significant surface scratches. This can lead to data loss or discs that simply cannot be read. If this is the case, remove the disc and wipe clean with a clean soft cloth from the center of the disc straight out to the edge of the disc. Never wipe a disc in a circular pattern. If the disc still causes an error, use a new S/W disc.
The vehicle's battery voltage is interrupted or falls below 9V. If this is the case, the system will attempt to re-start the update automatically when a stable power supply is attached to the vehicle. If it does not re-start automatically, repeat the steps for that disc.
If a serious error occurs during the update process, the system will enter an emergency recovery mode. If this is the case, an emergency application loading message will appear on the screen. This process can take between 1.5 to 4 minutes.

SERVICE PROCEDURE

Start vehicle engine or turn IGN ON and connect battery charger (10 A/Hr setting recommended). If the engine is not started and the vehicle is connected to a battery charger, ensure that the headlamp switch is in the OFF position and the HVAC blower fan is OFF.
Press the CCP knob DOWN to acknowledge legal disclaimer.
Ensure that there are no discs in the changer mechanism, by pressing the eject button [B] for 3 seconds. This will eject ALL discs that may be in the mechanism.
Verify that the message, "No Disc" is displayed.

[A] Vol Knob [B] Eject Button [C] Load Button
Press the load button [C] and insert the correct update disc when prompted.
NOTE: Follow the correct sequence; disc B2> B3>B4
After a few moments, the LCD screen will display a "Disc Error" message. This is normal.
NOTE: Wait 10 seconds after the disc is inserted before proceding to the next step.
Enter the S/W update menu by simultaneously pressing the [D] DISC/AUX, [E] BACK, [F] NAVI/MENU buttons while pressing the [G] VOL KNOB.
The S/W menu will now be displayed.
NOTE: The highlighted area in the screen shot to the right displays the HEAD UNIT S/W level.

The S/W level provided with this bulletin is 16.170.

If the vehicle already has 16.170, the update process is not necessary.
Using the CCP, scroll the focus bar down to 'SW Update' on the left side of the display screen, and 'jog' the CCP to the right.
Highlight Start Update and press the CCP down.
Start the update by selecting 'Yes' and pressing the CCP down.
The S/W download process will begin and a download progress indicator will appear for a few moments.
The system will then re-boot. You will see the system's splash screen momentarily...
The installation progress indicator will now be displayed and the installation will begin.
Approximate download and installation times:

Head Unit 10 minutes

UTA 10 minutes

Hard Disc Drive 45 minutes
After the successful download and installation of the S/W, the system will re-boot once again and display the splash screen.
The legal disclaimer will be displayed once again. Press the CCP down to acknowledge disclaimer.
Eject the head unit disc (B2) and repeat steps 4 through 15 for the UTA update disc (B3).

NOTE: UTA update is approximately 10 minutes.
Eject the UTA disc (B3) and repeat steps 4 through 15 for the Hard Disc Drive disc (B4).
NOTE: HDD update is approximately 45 minutes.

IMPORTANT: When beginning the HDD update, carefully watch the start of the process for 3 minutes, return after 15 minutes (total time) and watch for 3 minutes, and then return after 45 minutes (total time).

18a. Enter the S/W update menu (step 6) to confirm that the head unit S/W and the HDD S/W has been updated correctly.
- The first box shows the head unit level. It should read 16.170_xxx.
- The second box shows the HDD level. It should read NA_3.0.01_xxx.
18b. Press the AM/FM button on the CCP panel.
- Using the CCP dial, jog to the left of the screen and highlight "Local Stations".
- The right side of the screen should now be populated with a list of local (strong) FM stations.
18c. Press the XM button on the CCP panel.
- Using the CCP dial, jog to the left of the screen and highlight "Channel List".
- The right side of the screen should now be populated with the XM channel list.
  NOTE: The vehicle must be outside with a clear view of the sky for the channel list to populate correctly.
18d. Press the MAP button on the CCP panel and drive the vehicle a short distance (e.g. 1 city block) with at least (2) changes in heading. Ensure that the vehicle icon on the screen matches actual location and direction.
18e. Change the default state value from MI (Michigan) to the customer's state of residence.
- Press the NAVI/MENU button, jog the dial to the right of the screen, and highlight ADDRESS. Press the CCP knob down.
- From the Smart Speller, jog the dial down to highlight STATE/PROV. Press the CCP knob down.
- Using the Smart Speller, spell the state. Alternately, you may simply jog the dial to the left and select the state from the pick list. Once you have selected the state from the pick list, press the CCP knob down to change the default state.
- The upper left-hand of the screen should now display the new default state. In this example, the default state has been changed to AZ, Arizona.

WARRANTY INFORMATION

OP CODE	OPERATION	OP TIME
30B040R2	DIS Update Only	0.4 in/hr.
30B040R3	DIS & Map Update	0.7 m/hr