Transmitter Code Registration

Connect the DLC cable of hi-scan to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on hi-scan.

Fig 1: Connecting DLC Cable Of HI-Scan To Data Link Connector
Courtesy of HYUNDAI MOTOR CO.
Select the vehicle model and then do "CODE SAVING"

Fig 2: Scan Tool Display - "Code Saving"
Courtesy of HYUNDAI MOTOR CO.
After selecting "CODE SAVING" menu, push "ENTER" key, then the screen will be shown as below.

Fig 3: Scan Tool Display - Select "Code Saving" Menu And Push "Enter"
Courtesy of HYUNDAI MOTOR CO.
After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving. Follow steps 1 to 4 and then code saving is completed.

Fig 4: Scan Tool Display - Select "Code Saving" Menu (1 Of 4)
Courtesy of HYUNDAI MOTOR CO.

Fig 5: Scan Tool Display - Select "Code Saving" Menu (2 Of 4)
Courtesy of HYUNDAI MOTOR CO.

Fig 6: Scan Tool Display - Select "Code Saving" Menu (3 Of 4)
Courtesy of HYUNDAI MOTOR CO.

Fig 7: Scan Tool Display - Select "Code Saving" Menu (4 Of 4)
Courtesy of HYUNDAI MOTOR CO.