FixVault
Home › Hyundai › 2009 › Santa Fe GLS, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › BCM (Body Control Module) › BCM (Body Control Module) › Body Control Module › Replacement

Body Control Module: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A). Avoid damaging retaining clip. (Refer to CRASH PAD )
    Fig 1: Identifying Crash Pad Lower Panel
    G05353330Courtesy of HYUNDAI MOTOR CO.
  3. Remove the body control module (A) and antenna cable after loosening 3 bolts and disconnecting connector.
    Fig 2: Locating Body Control Module
    G05353331Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
About FixVault