FixVault
Home › Hyundai › 2009 › Tucson GLS, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Immobilizer Control System › DTC P169A SMARTRA Authentication Fail › Monitor Scan Tool Data

Monitor Scan Tool Data

  1. Connect scan tool to Data Link Connector (DLC).
  2. IGN "ON" & Engine "OFF"
  3. Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter on the Scan tool.

    Specification: 'LEARNT'

    Fig 1: Monitoring KEY STATUS Smartra Status And ECU Status Parameter
    G05535551Courtesy of HYUNDAI MOTOR CO.

    Fig 1) This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt

  4. Has the "SMARTRA" status been learnt?

    YES 

    • Keep "KEY ON" status for 1 hours to withdraw "Locked by Timer" status. Then register transponder and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

About FixVault