Power Supply Circuit Inspection

■ Check for open or short in power harness 

1. Ignition "OFF".
2. Measure voltage value between terminal "4" of Multifunction switch and chassis ground.

   Specification:  Approx. 12V

   Fig 1: Measuring Voltage Value Between Terminal 4 Of Multifunction Switch And Chassis Ground

   Courtesy of HYUNDAI MOTOR CO.
3. Is the measured voltage within specifications?

   YES 

   • Go to "COMPONENT INSPECTION " procedure.

   NO 

   • Check for open or short in power harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.