FixVault
Home › Hyundai › 2010 › Elantra GLS › Repair and Diagnosis › Transmission › Transmission Control Systems › Automatic Transaxle Control System › Transaxle Oil Temperature Sensor › Repair procedures (A4CF2) › Removal

Repair procedures (A4CF2): Removal

  1. Remove the battery terminal.
  2. Lift the vehicle.
  3. Remove the under cover.
  4. Loosen the drain plug and drain the transaxle oil.
  5. Remove the oil pan. (Refer to appropriate Automatic Transaxle Disassembly Overhaul article )
  6. Remove the oil filter.
  7. Remove the valve body. (Refer to appropriate Automatic Transaxle Disassembly Overhaul article )
  8. Disconnect the main harness connector (A) from the valve body.
    Fig 1: Disconnecting Main Harness Connector From Valve Body
    G06863431Courtesy of HYUNDAI MOTOR CO.
About FixVault