Monitor Scantool Data

Check status
1. IGN "ON" & Engine "OFF"
2. Monitor the "ECM, Key and Smartra Status" Parameter on the Scantool.
  Specification: 'LEARNT'
  
  Fig 1: Scan Tool Display - "ECM Status" Parameter
  Courtesy of HYUNDAI MOTOR CO.
  
  This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt
3. Have both the ECM and KEY status been learnt?
  YES
  - Substitute with known good "virgin" transponder and go to "COMPONENT INSPECTION " Procedure.
  NO
  - Go to "COMPONENT INSPECTION " Procedure.