FixVault
Home › Hyundai › 2011 › Accent GL › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis (2 Of 2) › DTC P0605: Internal Control Module Read Only Memory (ROM) Error › Scan Tool Diagnostics › Monitor Scan Tool Data

Monitor Scan Tool Data

  1. Connect scan tool to Data Link Connector (DLC).
  2. Key "ON".
  3. Monitor DTC (Diagnostics Trouble Code) on the scan tool.
    Fig 1: Monitoring DTC (Diagnostics Trouble Code) On Scan Tool
    G06881916Courtesy of HYUNDAI MOTOR CO.
  4. Are the parameters displayed correctly?

    YES 

    1. Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    1. Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.
About FixVault