Water Temperature Control Assembly

NOTE: Clean the contact face before assembly.

Install water temperature control assembly (B) with new gasket.
Tightening torque

18.62 ~ 23.52Nm (1.9 ~ 2.4kgf.m, 13.74 ~ 17.36lb-ft)

Fig 1: Identifying Water Temperature Control Assembly And Gasket
Courtesy of HYUNDAI MOTOR CO.

NOTE: Use new O-rings (C) when reassembling.
Connect water hoses to the water temperature control assembly.
Install wiring protector.
Connect WTS & gauge connector.
Connect the radiator upper hose (A) and the lower hose (B).

Fig 2: Identifying Radiator Upper And Lower Hoses
Courtesy of HYUNDAI MOTOR CO.
Install air cleaner assembly.
Fill with engine coolant.
Start engine and check for leaks.
Recheck engine coolant level.