Repair Procedures: Inspection: MLA

1. Inspect MLA.

   Using a micrometer, measure the MLA outside diameter.

   MLA O.D. 

   Intake/Exhaust :34.964 ~ 34.980mm (1.3765 ~ 1.3771in.)

2. Using a caliper gauge, measure MLA tappet bore inner diameter of cylinder head.

   Tappet bore I.D. 

   Intake/Exhaust :35.000 ~ 35.025mm (1.3779 ~ 1.3789in.)

3. Subtract MLA outside diameter measurement from tappet bore inside diameter measurement.

MLA to tappet bore clearance 

[Standard]

Intake/Exhaust : 0.020 ~ 0.061mm (0.0008 ~ 0.0024in.)

[Limit]

Intake/Exhaust : 0.07mm (0.0027in.)