FixVault

Repair procedures: Inspection

WARNING: This page is about a different car, the 2011 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. If there is damage, replace the clutch set.
  2. Replace the clutch set with a new one if it is noisy or has excessive play/drag.
    Fig 1: Checking Pulley
    G07256979Courtesy of HYUNDAI MOTOR CO.
  3. Check operation of the magnetic clutch. Connect the compressor side terminals to the battery (+) terminal and the ground battery (-) terminal to the compressor body. Check the magnetic clutch operating noise to determine the condition.
    1. Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.
    2. Adjust the drive belt
    3. Charge the system and test its performance.
    Fig 2: Checking Operation Of Magnetic Clutch
    G07256980Courtesy of HYUNDAI MOTOR CO.