Repair Procedures: Replacement

Using the special tools (09214-32000 & 09216- 211000), remove the bushing from the lower arm.

Fig 1: Removing Bushing From Lower Arm Using Special Tools (09214-32000 & 09216- 211000)
Courtesy of HYUNDAI MOTOR CO.
Apply soap solution to the following parts.
1. Outer surface of the bushing.
2. Inner surface of the lower bushing mounting part.
Using the special tools (09214-32000 & 09216-21100), install the busing on the lower arm.

Fig 2: Installing Busing On Lower Arm Using Special Tools (09214-32000 & 09216-21100)
Courtesy of HYUNDAI MOTOR CO.

CAUTION: Insert bushing in the direction shown in the illustration.

Separation force is over 800N.m (800kgf, 1,763lb-ft)

Fig 3: Bushing Installation Position
Courtesy of HYUNDAI MOTOR CO.