FixVault
Home › Hyundai › 2011 › Azera Limited › Repair and Diagnosis › Body & Frame › Power Windows › Power Window Motor › Repair Procedures › Inspection › Rear Power Window Motor

Rear Power Window Motor

  1. Remove (-) negative battery terminal.
  2. Remove the rear door trim panel. (Refer to the)REAR DOOR
  3. Disconnect the 2P connector from the motor.
    Fig 1: Identifying Rear Power Window Motor Terminal Layout
    G07250271Courtesy of HYUNDAI MOTOR CO.
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.
    Fig 2: Terminal Continuity Chart
    G07250272Courtesy of HYUNDAI MOTOR CO.
About FixVault