Repair Procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal.
NOTE:
- When installing, apply the ATF oil or white Vaseline to the O-ring (A) not to be damaged.
  
  Fig 1: Identifying O-Ring
  Courtesy of HYUNDAI MOTOR CO.
- Continue to apply liquid gasket at application points at the valve body cover with ø2.5mm (0.0984in.) thickness.
  Liquid gasket Part name:
  
  Threebond 1281B or LOCTITE FMD-546
- Adding automatic transaxle fluid. (Refer to "AUTOMATIC TRANSAXLE SYSTEM " in this group.)