FixVault
Home › Hyundai › 2011 › Elantra GLS, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System Components › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor after removing the installation bolt.
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G07264068Courtesy of HYUNDAI MOTOR CO.
About FixVault