FixVault
Home › Hyundai › 2011 › Elantra GLS, Standard › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Repair procedures › Inspection › Antenna Status Check

Antenna Status Check

  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. Select the "Antenna Status Check".
    Fig 1: Scantool Display - ID Register
    G07256494Courtesy of HYUNDAI MOTOR CO.
  3. After IG ON, select the "Antenna Status Check".
    Fig 2: Scantool Display - Antenna Status Check
    G07256495Courtesy of HYUNDAI MOTOR CO.
  4. Set the smart key near the related antenna and operate it with a GDS.
    Fig 3: Scantool Display - Interia Antenna 1
    G07256496Courtesy of HYUNDAI MOTOR CO.
    Fig 4: Scantool Display - Interia Antenna 2
    G07256497Courtesy of HYUNDAI MOTOR CO.
  5. If the smart key runs normal, the related antenna, smart key(transmission, reception) and exterior receiver are normal.
  6. Antenna status
    1. INTERIOR Antenna 1
    2. INTERIOR Antenna 2
    3. Trunk antenna
    4. BUMPER/Antenna
    5. DRV_DR Antenna
    6. AST_DR Antenna
About FixVault