FixVault
Home › Hyundai › 2011 › Equus Signature › Repair and Diagnosis › Body & Frame › Exterior Body Panels › Power Trunk Module › Power Striker › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk trim in the trunk. (Refer to the "TRUNK ")
  3. Disconnect the power striker connector (A).
    Fig 1: Identifying Power Striker Connector
    G07313014Courtesy of HYUNDAI MOTOR CO.
  4. Remove the power striker (A) after removing the screws.
    Fig 2: Identifying Power Striker Screws
    G07313015Courtesy of HYUNDAI MOTOR CO.
About FixVault