FixVault
Home › Hyundai › 2011 › Equus Signature › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System Components › Front Wheel Speed Sensor › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the connector after removing the front wheel speed sensor clip.
    Fig 1: Identifying Front Wheel Speed Sensor Clip Connector
    G07312236Courtesy of HYUNDAI MOTOR CO.
  2. Remove the front wheel speed sensor.

    (Refer to Driveshaft and Axle group - Front Axle assembly)

  3. Installation is the reverse of removal.
About FixVault