FixVault
Home › Hyundai › 2011 › Equus Signature › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Fob Holder › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative(-) battery terminal.
  2. Remove the glove box assembly and housing. (Refer to "CRASH PAD ")
    Fig 1: Identifying Glove Box Assembly And Housing Screws
    G07313276Courtesy of HYUNDAI MOTOR CO.
  3. Remove the connectors (A).
    Fig 2: Identifying Connectors
    G07313277Courtesy of HYUNDAI MOTOR CO.
  4. Remove the Fob holder assembly(A) from the glove box housing.
    Fig 3: Identifying Fob Holder Assembly
    G07313278Courtesy of HYUNDAI MOTOR CO.
About FixVault