System Components

PTL Drive Unit (A).

Fig 1: Identifying PTL Drive Unit
Courtesy of HYUNDAI MOTOR CO.

Power trunk lid drive unit consists of motor & driven gear, PTL module, PTL motor and drive arm.

PTL drive unit is located in rear left trunk trim. PTL drive unit opens and closes the trunk connected push rod automatically.
Power latch (A)

Fig 2: Identifying Power Latch
Courtesy of HYUNDAI MOTOR CO.

Trunk opened by actuator after releases of latch's lock.

Built in the Micro switch for monitoring the latch lock & unlock status.
Power Striker

Fig 3: Identifying Power Striker
Courtesy of HYUNDAI MOTOR CO.

By using actuator cinching the striker to go down strongly when the trunk is closed by motor.

Built in the micro switch for monitoring the striker's position.
SMK(Smart key)

Fig 4: Identifying Power Trunk Module Button
Courtesy of HYUNDAI MOTOR CO.

Push the power trunk lid open of the SMK more than 0.5s to open the power trunk. Power Open operation shall be reversed when an additional Open/Close signal is received during power opening.
Trunk open/close switch(A).

Fig 5: Identifying Trunk Open/Close Switch
Courtesy of HYUNDAI MOTOR CO.
Trunk inner switch (A)

Fig 6: Identifying Trunk Inner Switch
Courtesy of HYUNDAI MOTOR CO.