FixVault
Home › Hyundai › 2011 › Equus Ultimate › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System Components › Purge Control Solenoid Valve (PCSV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A) and the vapor hose (B).
  3. Remove the purge control solenoid valve (C) after removing the installation bolt.
    Fig 1: Identifying Purge Control Solenoid Valve Connector, Vapor Hose And Purge Control Solenoid Valve
    G07311555Courtesy of HYUNDAI MOTOR CO.
About FixVault